Contact Us
0086-411-66665948
sales@dlrtr.com
joycewang323
Products
YRT Rotary Table Bearing Introduction
YRT precision rotary table bearing is a kind of bearing fixed by a bidirectional thrust bearing and a
centripetalguided bearing. They can support radial loads, axial loads from both directions and
tilting moments free from clearance and are particularly suitable for bearing arrangements with
high requirements for running accuracylike rotary tables, millings heads and reversible clamps.Due
to the fixing holes in the bearing rings, the units are very easy to fit. The bearings are radially and
axially preloaded after fitting.
Bearing features:
1. High precision: precision at P4, P2.
2. High rigidity: YRT series bearings are with preload.
3. High load capacity: bearings can support axial load, radial load and tilting load.
4. High speed: YRTS series bearings can be applied in the high speed working condition
Sealing/Lubricant:
YRT bearings are supplied with seals. YRT bearings are greased by a lithium complex soap grease
and can be lubricated via the outer ring and L-section ring.
Operating temperature:
YRT bearings are suitable for operating temperatures from 30℃ to 120℃.
We have the series below, click to see each details:
YRT series rotay table bearings
YRTS series high speed rotaty table bearings
Axial and radial bearing YRTM with the angle measuring system
在球面滚子推力的轴承负荷从另一个跑道转交其他轴承轴向的角度。因此，轴承是适合承受径向载荷，除了同时代理 axaial 荷载。另一种受众特征的球面滚子推力轴承是他们自调心能力。这使得轴承不敏感轴挠度和 shafy 相对于轴承不同心度偏差。...
Hot tags : Thrust Roller Bearing Large size Roller Bearing Precision Needle Roller Bearings
轴向/径向轴承 YRT: YRT 轴承组成的 athrust/径向轴承座圈、 推力/径向轴垫圈、 止推垫圈、 两轴滚针和保持架组件和径向圆柱组。轴承座圈和轴垫圈等距管接头螺栓。这种轴承具有高的轴向负荷和径向负荷和倾 rigidityand 高精度高。这种轴承可以用于机床和其他高精度机械回转工作台或分一套，和也可以使用的 forchuck，测量仪器和测试设备和回转工作台配置。这种轴承质量要求更高的部...
Hot tags : YRT turntable bearing YRT bearing YRT rotary table bearing
凹球花键轴截面为圆形，和样条槽的两端轴颈直径可以设计大于凸球样条。
Hot tags : Ball Spline Linear Motion Spline Linear Spline
根据螺母类型，有两种凸样条圆柱形和方形。它有三个凸上部 rails 共享同样的花键轴的外圆和球在由三个 rails 凸上部和样条螺母的各自部分形成某些六加载路径中运行。...
Hot tags : linear ball spline
根据螺母类型，有两种凸样条圆柱形和方形。它有三个凸上部 rails 共享同样的花键轴的外圆和球在由三个 rails 凸上部和样条螺母的各自部分形成某些六加载路径中运行。...
Copyright © Dalian Running Engineering.dyyseo.com
